It can be seen from the distance between street lamps that if solar led street lamps are installed on residential roads, we will find that their installation distance is obviously different from that of ordinary street lamps. Are there requirements for the installation space of solar led street lamps? What is the most reasonable installation space? Today, Longze Lighting Co., Ltd., a manufacturer of solar led street lamps, will invite you to discuss this question and find the answer.

Solar led street lamps are mainly used for road lighting. When installing solar led street lamps, if the installation distance is too long, black spots will appear in the main lighting area. In addition, if the solar led street lamps are installed too close, the number of solar street lamps will increase, resulting in waste of lighting. The Solar street lamp installed in the expressway community is usually about 3.5 meters high. The light source used is about 15 watts, and the distance between each Solar street lamp is about 8 to 12 meters. At some corners, another solar street lamp shall be installed to avoid blind spots.

The spacing of solar led street lights depends on several factors, such as its lighting power, the height and width of the road. This first depends on the width of the road and the lighting requirements. Generally, when the road is less than 10m, it can be installed crosswise. When the road exceeds 15m, bidirectional symmetric lighting is recommended. The optimal distance of 60W split Solar street lamp is 30-50 meters, while the optimal distance of 30W integrated Solar street lamp is 30 meters.

Generally, the following three lighting methods are used: single side lighting, two side cross lighting and two side symmetric lighting. Special roads such as intersections, T-junctions and corners can be illuminated according to the actual situation. If it is necessary to illuminate the motorway and non motorway at the same time, single-sided or double-sided two-way lighting can be used.

When installing solar led street lights, please carefully install them on the side of the road that does not affect traffic, so as to avoid collisions and safety accidents when pedestrians appear.